In order to use Norstar/BCM digital phones with UCX software, these phones must be connected to the DSM16. The DSM16 can be configured to communicate with a specific UCX Software using its Web-based Configuration Utility. This UCX Server configuration applies to all Nortel digital phones connected to the UCX DSM16.
To specify the UCX Server to which DSM16 is connected, perform the following steps:
Please refer to the DSM16 - Gateway Configuration for more information on the configuration of other parameters.
Refer to the DSM16 - Wiring Chart for wiring information on the RJ-21 telephony connector. You can connect 16 Nortel digital telephones to the RJ-21 telephony connector on the system's main unit.
Refer to the Device Configuration page for details on configuring the options for Nortel digital phones connected to the DSM16.
To configure the phone on the UCX Server, follow the instructions for Adding an XSTIM Extension.