Panasonic PBX using E-MetroTel PSTN SIP Channels (SIP Trunks)

Panasonic KX-NS system settings for E-MetroTel PSTN SIP Trunks

The procedure for configuring Panasonic KX-NS settings is included below:

E-MetroTel PSTN SIP Trunk Account Assumptions:

This guide is based on the following sample SIP account details:

• SIP SERVER:  sip-us.emetrotel.net 
• VOIP Username : 2110000…
• VOIP Password : 6Dx4………
• Account DID:  1347812222
• Number of Channels: 2 channels

Add V-SIPGW16 card

1. Check to be sure SIP Client Port Number at Shelf Property for V-SIPGW is 5060
   
2. Go to Port Property of the card and enter the SIP account - add basic channel
   Main Tab:​​​
   
   Account Tab:
   
   Register Tab:
   
3. Set up Calling Party  to "PBX-CLIP“
   Calling Party Tab:
   
4. Add  second channel -  add channel for the slot where has been  set up the Basic channel
   
5. Change both ports to "Inservice“
   
6. Select Trunk Group number for these two channels
   
7. Change COS of these Trunk group to "1“
   
8. Write DID number to DDI/DID Table for extension that will use it (inbound)
   
9. Write CLIP  for the extension (outbound)
   
10. Modify dialing plan