Release 7.0 Update Process

  • Printer-friendly version
  • EPUB version
Please ensure that you have read through ALL sections of this UCX Release 7.0 update procedure before using the UCX Imager tool on any system. Using the UCX Imager tool on a system that has not been properly updated and backed up can cause complete loss of configuration data and licenses.

Background

The key content of UCX Release 7.0 is described in UCX 7.0 and InfinityOne 4.0 General Availability.

You MUST be running Release 6.0 or Release 5.0 with active Software Support on a supported Galaxy hardware platform (Mini, 250, 2930, i5, 450, 1000, 3000) before attempting to update the system to UCX Release 7.0.

Table of Contents

1.0 UCX Imager Tool (for use on Appliances)
1.1 UCX Imager Modes of Operation;
1.2 UCX Imager User Interface Requirements
1.3 Applicable Platforms
1.4 Reuse of UCX Imager tool
1.5 UCX Imager Process failures
2.0 Preparing to Reimage to R7
3.0 Preparing to update to InfinityOne 4.0
4.0 Reimaging UCX 6.0 systems with the UCX Imager Tool
4.1 Galaxy Mini using the Front Panel RST button and RUN LED;
4.2 Galaxy 250 using the Front Panel LCD Display and Menu Keys
4.3 Galaxy Mini, 250, 2930, i5, 450, 1000, 3000 using SSH
4.4 Galaxy 250, 2930, i5, 450, 1000, 3000 using Keyboard and Monitor
4.5 Adjusting the BIOS (when required)
5.0 Completing the Reimage to UCX 7.0 Process
6.0 Completing the Update to InfinityOne 4.0
7.0 Upgrade process for Virtual Machines


Note: Use the following links to jump to each of the main sections:

Page Tags: 
upgrade
Update
Release 7 Update
Imager